How to clean matte leather items

How to clean matte leather items

1. Frosted leather clothes

1. To avoid the above problems, when cleaning by hand at home, neutral washing materials (such as matte cleansing) should be selected. To prevent the leather jacket from bleaching, deforming, or wrinkling, low-temperature washing is required and lightly brushed with a soft brush, and do not rub or twist. When rinsing with water, you should hold the shoulders of the clothes with both hands and carry them up and down. For the last time you pour water and rinse, add a few drops of white vinegar to the water to neutralize the possible remaining detergent in the leather.

2. The most noteworthy issue when cleaning this type of clothing is to prevent the leather coat and leather board from degreasing and hardening. Secondly, when the leather coat is washed and dried, the deformation of the clothes should be minimized as much as possible.

3. Before drying the leather clothes, it is best to spread the leather clothes flat on a clean dry bath towel. Wait until the moisture is basically evaporated, then dry the other side. When the leather jacket is still dry, stretch all parts with your hands and rub and massage appropriately to eliminate possible wrinkles. After the leather jacket is completely dry, the leather surface needs to be gently combed with a soft brush to make the leather jacket look cleaner and more organized.

4. To avoid wrinkling deformation, the leather jacket can be rinsed without dehydrating after being rinsed, and a clean and clean towel is used to absorb moisture; the leather jacket can also be wrapped, rolled up and dehydrated.

2. Leather sand and leather shoes

1. When cleaning matte shoes, use a soft brush to gently wipe away the stains. Be careful to wipe in the same direction to make the texture smooth, but do not apply oil. Make a cleaning solution with 2 parts of dishwashing detergent, 1 part of vinegar, and 50 parts of water (temperature 30-40℃), dip the shoe brush into the solution and carefully wash the surface of the leather shoes.

2. When refueling, apply the leather fat-adding agent or emulsified oil (can be obtained from the tannery, and the oil content is controlled between 50 and 60%) on the suede that is washed and dried, and the amount is about 100 grams per pair of shoes. During the application process, be careful to make the oil penetrate into the skin as much as possible.

3. When washing and scrubbing, be careful not to immerse the shoes in the solution, and try not to dip the leather shoes in too much solution. After basically washing the surface of the leather shoes, wash and scrub the surface of the leather shoes 1 to 2 times with clean water, and place the shoes in a cool and air-conditioned place until half dry.

4. After 30 minutes, use 35℃ water to remove the oil on the surface of the shoe and place the shoe dry in a cool and airy place. When the suede leather shoes are dry during finishing, use a wire brush or coarse sandpaper to make the fluff appear and then use a brush to brush. Through the above procedures, the suede leather shoes will be like new shoes.

3. Frosted leather bags

Before dry cleaning the frosted leather bag, polish the contaminated parts with fine sandpaper, then spray dry cleaning additives on the part, and then add grease and soften, dry, ironing and other procedures. What I am introducing here is a more professional cleaning method. If the frosted leather turns black and discolored, there are many nursing processes. It is not recommended to wash it yourself. It needs to be sent to a special care shop for cleaning.

This is really no different from other bags. If it is stained and we clean it ourselves, it will easily cause the bag to fade. If it is just a little bit of stain, you can use soft fabric to dip some warm water and wipe it gently. Never use too much force.

There is another small way, but only for those little stains. We can use soft fabric to dip it in warm water, dip it a little bit, and just a little toothpaste. Wipe it gently, then wipe it clean with warm water, and then wait for it to dry itself. However, this method cannot be used in the same place, otherwise the color will become lighter and lighter.