Cleaning and maintenance of induction flushers-Purchase of induction flushers

Cleaning and maintenance of induction flushers - Purchase of induction flushers

Purchase knowledge of induction flushers

Check the flushers:

Check whether the pipe body and surface of the flushers are smooth and smooth. This is because in humid environments such as kitchen and bathroom space, the surface of the flusher generally needs to be chrome-plated, but the same chrome-plated process is very different. According to the merchant, a good pipe body is made of all copper material, and the surface must undergo grinding, polishing, dust removal, nickel plating, chrome plating and other treatment processes to ensure that it will not turn black and bubble and fall off during use. Generally speaking, from the surface of the flush valve, the brighter and more delicate you can see with the naked eye, the better the coating process is.

Test sensor:

Test the sensor according to the induction time and water outlet time mentioned in the product use book, and test it on-site to determine whether it is as mentioned in the book.

Ask about service:

sensors are technological products, and occasionally insensitive or overly sensitive becomes a problem. Therefore, you need to ask the specific terms of the service when purchasing.

The style judgment and selection of products

Choose a water flusher that suits you. There is no big choice in style. You can only choose products of different prices based on your own needs in terms of cost performance.

Induction flusher cleaning

Induction flusher cleaning is quite simple. Use a wrung-out wet rag to wipe the surface and keep the flusher clean and tidy. Cleaning of the induction module is more important. If too much dust stain accumulates, it will affect its sensing sensitivity and reduce the product's usage effect. Maintenance of

Induction flusher

Phenomenon 1: Possible causes and troubleshooting methods: Battery power exhausted (DC product) — — Replace new battery.

Power outage (AC product)—— Waiting for incoming call.

Power failure (AC product)—— Check the power junction box.

Shut off water—— Wait for incoming water.

The filter is too dirty and causes silt — — Clean the filter.

There is dirt in the sensing window —— erase the dirt.

Battery power exhausted (DC product)—— Replace new battery.

Phenomenon 2: No water off

Possible causes and troubleshooting methods: Sudden power outage (AC product)—— Waiting for incoming call.

Power failure (AC product)—— Check the power junction box.

Phenomenon 3: The flush amount is too small

Possible causes and troubleshooting methods: The water volume adjustment is too resting — Adjust the water volume adjustment button.

filter is too dirty —— Clean the filter.

Phenomenon 4: The flushing volume is too large

Possible causes and troubleshooting methods: The water volume is adjusted too large — — Adjust the water volume adjustment button.